| My visit to DR Chop | |
|
+5ChrisC va.redneckrazor GunRunner kevinm Clayboy 9 posters |
|
Author | Message |
---|
Clayboy Member #01
Posts : 537 Join date : 2010-03-02 Age : 53 Location : Winchester, Ky
| Subject: My visit to DR Chop Sat Mar 13, 2010 12:29 pm | |
| | |
|
| |
Clayboy Member #01
Posts : 537 Join date : 2010-03-02 Age : 53 Location : Winchester, Ky
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 12:34 pm | |
| This was something I was wanting to do myself but after I had learned that Dr Chop had done almost 20, I thought it might just be best to let someone with his experience take over. It took him about an hour and a half and I know it would have taken me all weekend. Brian "Dr Chop" is very tallented and I am Very happy with his work. I still have to get used to the cage being lower but I am sure it will work out. | |
|
| |
kevinm
Posts : 56 Join date : 2010-03-10 Age : 46 Location : Irvine, Kentucky
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 1:21 pm | |
| After I chopped mine I bought the UTV Crap seat lowering brackets and it helped a lot it not only lowered the seats but i felt that the position was more relaxed. | |
|
| |
GunRunner Admin
Posts : 5241 Join date : 2010-03-09 Age : 70 Location : North Georgia
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 1:26 pm | |
| Brian is a super nice guy, i rode with him a couple of times but did not know he did this. If i lived closer Dr. Chop would be getting hold of mine!! | |
|
| |
Clayboy Member #01
Posts : 537 Join date : 2010-03-02 Age : 53 Location : Winchester, Ky
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 2:41 pm | |
| - kevinm wrote:
- After I chopped mine I bought the UTV Crap seat lowering brackets and it helped a lot it not only lowered the seats but i felt that the position was more relaxed.
Has Brian looked at those bases? I would like a set for myself! | |
|
| |
Clayboy Member #01
Posts : 537 Join date : 2010-03-02 Age : 53 Location : Winchester, Ky
| |
| |
kevinm
Posts : 56 Join date : 2010-03-10 Age : 46 Location : Irvine, Kentucky
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 3:03 pm | |
| Yes Brian has seen them Mikey and I have the same bases, I am still in the process of getting a CNC plasma cutter after that I can make what ever you want. | |
|
| |
va.redneckrazor
Posts : 131 Join date : 2010-03-12 Age : 51 Location : big stone gap va.
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 3:41 pm | |
| which cnc plasma you looking at . ive been looking into getting one myself found one with a 4x6 or 4x8 table everything plasma included for 9 to 13 depending on what bells and whistles but the lower end still has everything you need im looking at alot less because the system would still be able to use one of my plasa cutters i already have if you already have a plasma cutter you can get into the whole system for around 4 to 5.25 for the software and hardware .let me know if you need any info on them | |
|
| |
Clayboy Member #01
Posts : 537 Join date : 2010-03-02 Age : 53 Location : Winchester, Ky
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 4:48 pm | |
| - kevinm wrote:
- Yes Brian has seen them Mikey and I have the same bases, I am still in the process of getting a CNC plasma cutter after that I can make what ever you want.
Just let me know, I am very interested. Thanks! | |
|
| |
ChrisC Admin
Posts : 6746 Join date : 2010-03-10 Age : 57 Location : Marietta GA
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 6:34 pm | |
| Looks awsome Clay. Very nice...... Nothing like a little fab work..... | |
|
| |
GunRunner Admin
Posts : 5241 Join date : 2010-03-09 Age : 70 Location : North Georgia
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 6:40 pm | |
| | |
|
| |
kevinm
Posts : 56 Join date : 2010-03-10 Age : 46 Location : Irvine, Kentucky
| Subject: Re: My visit to DR Chop Sat Mar 13, 2010 9:56 pm | |
| I have been weighing both options, I have a plasma cutter but when u use it in the cnc machine you have to change the way that it triggers from the torch to the computer, so I will prob end up with the whole system hopefully a 4x6 table. | |
|
| |
va.redneckrazor
Posts : 131 Join date : 2010-03-12 Age : 51 Location : big stone gap va.
| Subject: Re: My visit to DR Chop Sun Mar 14, 2010 6:53 pm | |
| what system have you been looking into | |
|
| |
kevinm
Posts : 56 Join date : 2010-03-10 Age : 46 Location : Irvine, Kentucky
| Subject: Re: My visit to DR Chop Sun Mar 14, 2010 7:19 pm | |
| Plasmacam what do you think | |
|
| |
Clayboy Member #01
Posts : 537 Join date : 2010-03-02 Age : 53 Location : Winchester, Ky
| |
| |
va.redneckrazor
Posts : 131 Join date : 2010-03-12 Age : 51 Location : big stone gap va.
| Subject: Re: My visit to DR Chop Sun Mar 14, 2010 10:20 pm | |
| Ive been looking at the torchmate systems and the plasma route cnc the torchmate system looks to be the best deal ive found take a look the site you pick looks good also but the torchmate is cheaper i do believe the plasma route is more but i like the look of thier table better but i like price even better than the table look thiers no way around none are cheap | |
|
| |
ChrisC Admin
Posts : 6746 Join date : 2010-03-10 Age : 57 Location : Marietta GA
| Subject: Re: My visit to DR Chop Sun Mar 14, 2010 10:21 pm | |
| | |
|
| |
va.redneckrazor
Posts : 131 Join date : 2010-03-12 Age : 51 Location : big stone gap va.
| Subject: Re: My visit to DR Chop Sun Mar 14, 2010 10:26 pm | |
| whats the total price on a turnkey plasmacam it looks like a good machine basically like the torchmate system | |
|
| |
Big Ed
Posts : 156 Join date : 2010-03-10 Age : 47 Location : Beattyville, KY
| Subject: Re: My visit to DR Chop Mon Mar 15, 2010 9:07 am | |
| Gunny, I helped Bryan finish up a new cage this weekend that is for sale. He may even do an exchange with your cage and some $. Do you have his number? If not, PM me and I'll give it to you. | |
|
| |
GunRunner Admin
Posts : 5241 Join date : 2010-03-09 Age : 70 Location : North Georgia
| Subject: Re: My visit to DR Chop Mon Mar 15, 2010 10:53 am | |
| - Big Ed wrote:
- Gunny, I helped Bryan finish up a new cage this weekend that is for sale. He may even do an exchange with your cage and some $. Do you have his number? If not, PM me and I'll give it to you.
Thanks ED, i have a few ideas as to what i would want done to mine but see if you can get some pics of that cage and a price and post them here. | |
|
| |
Top Dog
Posts : 154 Join date : 2010-03-22 Age : 51 Location : Marietta GA
| Subject: Re: My visit to DR Chop Mon Mar 29, 2010 5:14 pm | |
| Does Dr. Chop do house calls? I want my cage chopped!!! Seriously, if he does I'm really interested. Can somebody ask him, that knows him? | |
|
| |
Big Ed
Posts : 156 Join date : 2010-03-10 Age : 47 Location : Beattyville, KY
| Subject: Re: My visit to DR Chop Mon Mar 29, 2010 5:18 pm | |
| my guess would be no. He has a complete s type lowered cage that he will sell or possibly exchange. I will ask him though. | |
|
| |
Top Dog
Posts : 154 Join date : 2010-03-22 Age : 51 Location : Marietta GA
| Subject: Re: My visit to DR Chop Mon Mar 29, 2010 5:20 pm | |
| I don't want to swap my cage, I have part of my door stuff welded to mine so I would want mine chopped. Thanks for asking him, let me know. Maybe Gunrunner would be interested in getting his done at the same time if he is willing to travel here. | |
|
| |
va.redneckrazor
Posts : 131 Join date : 2010-03-12 Age : 51 Location : big stone gap va.
| Subject: Re: My visit to DR Chop Mon Mar 29, 2010 8:04 pm | |
| IS DR. CHOP LOCATED IN KY. IF SO DONT THINk HE WILL DRIVE TO GA. | |
|
| |
teddy
Posts : 163 Join date : 2010-04-05 Age : 51 Location : corbin ky
| Subject: Re: My visit to DR Chop Mon Apr 05, 2010 11:43 pm | |
| I WONDER IF DR. CHOP WOULD LIKE TO DO A RZR 4 HOW DO I GET A HOLD OF HIM | |
|
| |
Sponsored content
| Subject: Re: My visit to DR Chop | |
| |
|
| |
| My visit to DR Chop | |
|