need help

Looking to buy a lift kit for my 2008 Rzr . And what about wheel spacers,1",1.5" or 2" which would be better.I'm tired of dragging on the rocks all the time.

On my 09 Le 50'' I added the roctek lift and 1.5 inch spacers on all wheels and it would go anywhere. roktek is on ebay, i got the spacers from atv outfiters.

I found both on EBAY ,just didn't know how good they was

THANKS

inkman40 wrote:

I found both on EBAY ,just didn't know how good they was

The Roktek Lift is a good lift for the money..It lasted me 2years before the front lift bracket broke. I welded the side that broke back together and in about six months the other side broke. I got tired of screwing with it so I customed my own....It just got fatigued from me jumping WR waterbreaks and landing hard on some of the big ones. The Roktek lift is good, but if you do a lot of jumping it wont hold up for long..Here is where it will break:

[You must be registered and logged in to see this image.]

I beefed up my racer tech lift in the front on my S.
it never broke. but after seeing Dodd break one at Brimstone.
i went home and took mine off and double walled and gusseted
mine. so that will never happen. the rear it built out of thick steel.
so they will never be a problem.....

I just put a 2" Racertech lift on mine and just ordered some ss108 rims. Every time I saw a little rock I would pucker my ass

if your going up you need a least a inch spacer on the wheels.
or you are going to do the Turtle.....

ChrisC wrote:

if your going up you need a least a inch spacer on the wheels.
or you are going to do the Turtle.....

high and narrow = on your side more often, you can talk that 50'' stuff but everybody comes around sooner or latter and widens them out for total enjoyment.

I would have gotten the S but there are to many places that it won't fit through. I would have had to turn around 6 times so far since I bought it if it was a S. That means I would have driven 1.5 hours one way for nothing. Believe me I would rather have a S.