| | Brakes |  |
|
|
| Author | Message |
|---|
inkman40
Posts : 51
Join date : 2010-04-20
Age : 53
Location : Tn
| Subject: Brakes  Tue Jun 22, 2010 9:48 pm | |
| my brakes seem to be locking up or dragging need help any advice | |
|
| | |
AIRBORNE
Posts : 298
Join date : 2010-03-29
Age : 50
Location : FT Knox, Kentucky
| | Subject: Re: Brakes Tue Jun 22, 2010 9:54 pm | |
| Have not had any issues with my brakes on the RZR, but on the Rhino I had to scuff the kingpins really good and add some lithium grease so the pads would slide better. Are you riding a lot of mud/water? | |
|
| | |
ChrisC
Admin
Posts : 6746
Join date : 2010-03-10
Age : 57
Location : Marietta GA
| | Subject: Re: Brakes Tue Jun 22, 2010 10:49 pm | |
| Ya check and make sure no mud has got the sliders binded up. after that, make sure no brake lines have any kinks in them....  | |
|
| | |
RZRS-EDGE
Posts : 316
Join date : 2010-03-12
| | Subject: Re: Brakes Wed Jun 23, 2010 4:08 pm | |
|
I have heard that when the front sprague carrier goes out it feels like the brakes are on ???????????????
| |
|
| | |
AIRBORNE
Posts : 298
Join date : 2010-03-29
Age : 50
Location : FT Knox, Kentucky
| | Subject: Re: Brakes Wed Jun 23, 2010 4:47 pm | |
| Wonder if there is any chance something got wedged in the brake caliper area causing it not to release? | |
|
| | |
inkman40
Posts : 51
Join date : 2010-04-20
Age : 53
Location : Tn
| | Subject: Brakes Wed Jun 23, 2010 9:43 pm | |
| Its the brakes because they are getting really hot | |
|
| | |
inkman40
Posts : 51
Join date : 2010-04-20
Age : 53
Location : Tn
| | Subject: Brakes Wed Jun 23, 2010 9:46 pm | |
| I ride in mud and water like everyone else but i'll try to clean the pins so everything moves good, Thanks for the help. | |
|
| | |
GunRunner
Admin
Posts : 5241
Join date : 2010-03-09
Age : 70
Location : North Georgia
| | Subject: Re: Brakes Fri Jul 09, 2010 12:06 pm | |
| - inkman40 wrote:
- Its the brakes because they are getting really hot
Had mine do this yesterday, turned out it is the brace that holds the caliper to the hub, it has 2 rods that go into the caliper thru two rubber boots, it was dirty and would not let the pressure off the pads when you let off the pedal. I took it all apart and cleaned the pins and greased them up good and that fixed it | |
|
| | |
ChrisC
Admin
Posts : 6746
Join date : 2010-03-10
Age : 57
Location : Marietta GA
| | Subject: Re: Brakes Fri Jul 09, 2010 8:21 pm | |
| - GunRunner wrote:
- inkman40 wrote:
- Its the brakes because they are getting really hot
Had mine do this yesterday, turned out it is the brace that holds the caliper to the hub, it has 2 rods that go into the caliper thru two rubber boots, it was dirty and would not let the pressure off the pads when you let off the pedal. I took it all apart and cleaned the pins and greased them up good and that fixed it And who do you have to thank , for telling you all this.....  ....................  | |
|
| | |
Guest
Guest
| | Subject: Re: Brakes Fri Jul 09, 2010 10:08 pm | |
| Chino brakes. Gotta love'em.......  |
|
| | |
GunRunner
Admin
Posts : 5241
Join date : 2010-03-09
Age : 70
Location : North Georgia
| |
| | |
ChrisC
Admin
Posts : 6746
Join date : 2010-03-10
Age : 57
Location : Marietta GA
| | Subject: Re: Brakes Sat Jul 10, 2010 10:11 pm | |
| ..................................................your  | |
|
| | |
Sponsored content
| | Subject: Re: Brakes | |
| |
|
| | |
| | Brakes | |
|
