Seat belt install on 2011 S

Ok bought some DFR seat belts and just looking the rzr over looks like I will have to take the plastic off the side to get to the bolt that has the stock unit held in place?? Anyone got any tips or suggestions.
Looks to me like its going to be a pata!!

edge22 wrote:

Ok bought some DFR seat belts and just looking the rzr over looks like I will have to take the plastic off the side to get to the bolt that has the stock unit held in place?? Anyone got any tips or suggestions.
Looks to me like its going to be a pata!!

Take the rear fender flairs off.
take several of the push pins out starting from the rear.
about 3. pull the rocker plastic back at the rear. You can
then get to the bolts....

Thanks for the tip. That dosent sound too involved

edge22 wrote:

Thanks for the tip. That dosent sound too involved

No , you can do both sides in about hafe hour to 45 min....

Which ones did you install? Did you attach to the bar behind the seats or did you bolt them in? I am looking to upgrade but can't decide how to attach.

Any insite is appreciated.

I use the wrap around on the bar behind the seat.
it allows for more adjustment. if you go with bolting them in.
make sure its where you want them , cause they dont move.
and if you do that. weld tabs on the bar. Do not drill holes
in the bar , its not thick enough. and its not the proper way to do it...

I bought the DFR seat belts. Yes they wrap around the bar behind the seat. My buddy bought some of the super atv ones alot cheaper and likes those also.

Good Deal.....