Doors

Im wanting to get some doors but im stuck between JL2 and pro armor. Id rather have the JL2s bc they are steel and you can take them off but ive heard they rattle. All my buddys have pro armor and i like them and they are strong but they dont come off. Any advice or experience with either of these doors?

Your going to get a 50-50 on this one cause people have both doors.
and both doors are good.
if you damage a Pro armor. unless you got a tig you can't fix it.
JL2 are steel you can bend it back or weld it , and they sell skins for like $30 if you damage one.
The rattle part can be stopped easy. Pro armor has a single hole you drill your self for the latch.
thats why they don't rattle. a JL2 has an along gated hole to make it fit easy , but will make the pin slide
around a bit. , if i had them i would just weld up the hole and redrill a single hole and they would not rattle.
Also you may want to look at UTV inc. they have a real nice door. but there a little more money.
I am in the same boat. i been trying to decide what i want , and been doing a lot of research...

I have the UTVinc doors on mine. They are steel and do not have any vent holes. They have slam latches so you don't have to fiddle with them when you get ready to close them. Just slam the door and it is latched.

I love my PA doors but once you flip it you pretty much cant bend it back perfect again

badride wrote:

I have the UTVinc doors on mine. They are steel and do not have any vent holes. They have slam latches so you don't have to fiddle with them when you get ready to close them. Just slam the door and it is latched.

Are they easy to install?

I like the fact that the jl2s are steel. I wasnt sure what ppl were talkin abt rattlin on the Jl2s thought it may have been the hinges but if its just the pin latch then that should be an easy fix then especially with them being steel. I thought you drilled them yourself like the PA. Ive installed several sets of the PA doors. Do the jl2s mount in the same spots as the PAs

aweisgarber wrote:

badride wrote:

I have the UTVinc doors on mine. They are steel and do not have any vent holes. They have slam latches so you don't have to fiddle with them when you get ready to close them. Just slam the door and it is latched.

Are they easy to install?

They sure are, as long as you have a sawzall and a welder.

PA doors weigh less, both are good doors, I think the PA look more professional without that home made look but thats just my opinion.

I have the Pro Armor doors on mine and they have been great.

I have the UTV INC. doors and love them!!! I've had the Pro Armor
doors and they're a well built door, but you can't beat the slam latch
on the UTV INC. doors!!!

I have the Proarmor doors. I use skins in the cooler months and nets in the warmer months. I have had to have one of the pins welded back on and have bent the passenger door with a tree. I have the slam latches and only have a rattle from the passenger side. That is due to it needing a adjustment on the slam latch. Love mine and with the weight of my machine I will not put steel doors on it.

mkrazr wrote:

I love my PA doors but once you flip it you pretty much cant bend it back perfect again

I hear that they cave in easy, especially in rutts that tip you side ways. ---they would be messed up in no time if I had them.... Also, I think they are hard to see out of. But they do look cool-I'll give them that.

+1 for the UTV INC doors