I wanted a stereo on my RZR and with the cold weather I needed some thing to do indoors, so here is what I came up with. I found a 4 speaker marine system with an amp, volume control knob, MP3 hook up, and a water proof bag for you MP3 or Ipod from Pyle. The only problem was how to install it so here is what I came up with.
Posts : 466 Join date : 2010-03-10 Age : 52 Location : Wise Va,
Subject: Re: RZR Stereo Tue Dec 28, 2010 3:14 pm
ChrisC Admin
Posts : 6746 Join date : 2010-03-10 Age : 58 Location : Marietta GA
Subject: Re: RZR Stereo Tue Dec 28, 2010 5:31 pm
Looks very good....
Guest Guest
Subject: Re: RZR Stereo Tue Dec 28, 2010 6:07 pm
Great job,looking good..
If you want to hide the wood grain and make it look like a factory job,you can buy a small fiberglass kit from any auto parts place and cover the wood part..I made a piece for my boat and used this kit,it looked factory made,the kit when I bought it was around $12...
BTW this also water proofs it..
Triel
Posts : 269 Join date : 2010-07-29 Age : 50 Location : Southern IL
Subject: Re: RZR Stereo Wed Dec 29, 2010 11:10 pm
Looks good. Would not work for me with a highly moded roll cage. I am getting ready to build one into my roof, but realized that I mad the cage to short for a speaker to be above my head.
Now, I have decided to build a RZR around a sound system, LMAO!
Guest Guest
Subject: Re: RZR Stereo Sat Feb 19, 2011 8:58 am
looks good!!! whats the best way to get power to the roof for the stereo?
Guest Guest
Subject: Re: RZR Stereo Sat Feb 19, 2011 10:15 am
Electrical wire would be a good start.. Just kidding!!!
rzrscott
Posts : 38 Join date : 2010-10-07
Subject: Re: RZR Stereo Sat Feb 19, 2011 10:33 am
With the system I am about to change out I used harness sheath and zip ties to get the power to the roof for my amp and speakers. When I install my new ssv works system I am going to drill port holes at the top of the front loop and at the bottom of the front loop then fish the wires through . Maybe use grommets or silicone to seal the holes. That's a nice job on your system. You could also use do it your self line X to better protect the wood and give it a factory look.
inkman40
Posts : 51 Join date : 2010-04-20 Age : 54 Location : Tn
Subject: measurements Wed Mar 02, 2011 10:29 pm
what are the measurements on the box. trying to figure out something for my rzr.
Tue Dec 28, 2010 1:47 pm
